Installation location: Ground
B. Delay Time: Within 30 seconds
C. Burning Time: 12-22 minutes

Unlock the cap turning 2~3 times to the left. Remove the plug and insert the safety fuze. Then, lock the cap turning to the right. Remove the cotter pin and pull thering, then it will be ignited.

The basic component of the firing device is a mechanical switch designed for mechanical actuationby pressure, pull, pressure release or tension (pull) release.
In addition, to its four mode capability, the KM142 can be used to ignite either a nonelectric blasting cap or a time blasting fuze for setting a short delay type booby trap.
The firing device is weather sealed and will also function under water.

The nonelectric blasting cap, practice KM769 is ignited the smoke charge of the demolition materials and the antipersonnel mines by the time-blasting fuze or the primers.

After connected the smoke charge and the electric basting cap, practice KM752 to the body, the charge is ignited by firing device, electrical KM57.
At this time, bursting-sound and smoke are occurred.

After connected the smoke charge and the practice electric blasting cap, practice KM752 to the body, the charge is initiated by the firing device, electrical KM57.
At this time, bursting-sound and smoke are occurred.

The Fuze ignites the delay tube then after 12~22 seconds the ignition charge and smoke charge are ignited.
The smoke is emitted for 10~15 minutes.

The firing device K471 is a mechanical switch designed for mechanical actuation by pressure, pull, pressure release or tension(pull) release. In addition, to its four mode capability, the K471 can be used to ignite either a nonelectric blasting cap or a time blasting fuze for
setting a short delay type booby trap.
The firing device is weather sealed and will also function under water.

After the electric blasting cap connected to the demolition
materials or the antipersonnel mines, the cap is ignited
the smoke charge by firing device, electrical KM57 and
T-200 or the similar apparatus such like it.

After connected the smoke charge and the electric
blasting cap, practice KM752 to the body, the charge
is ignited by firing device, electrical KM57.
At this time, bursting-sound and smoke are occurred.

After connected the smoke charge and the electric
blasting cap, practice KM752 to the body, the charge
is initiated by firing device, electrical KM57. At this time,
bursting-sound and smoke are occurred.